Skip to main content
Sell
Sell

Used 2017 Peterbilt Conventional Day Cab Trucks For Sale

Used 2017 Peterbilt conventional day cab trucks for sale: compare 337, 567, and 579 specs, engine records, emissions systems, and axle ratings.

By State
3 Listings

Selling a used 2017 peterbilt conventional day cab truck? List your used 2017 peterbilt conventional day cab truck for sale and reach thousands of commercial buyers.

Used 2017 Peterbilt Conventional Day Cab Trucks

Separate tractor specifications from straight-truck specifications when comparing used 2017 Peterbilt conventional day cab trucks for sale. A 579 day cab suits regional freight, a 567 serves vocational applications, and a 337 commonly carries a delivery or service body. These configurations are not interchangeable: check GVWR, GCWR, axle ratings, wheelbase, and whether the chassis has a fifth wheel or body mounts. Heavy-duty models can have PACCAR MX-11 or MX-13 engines with manual or automated transmissions; a 337 may pair a PACCAR PX-7 with an Allison automatic. Match gearing and cooling capacity to loaded weight, road speed, grades, and stop frequency rather than buying horsepower alone.

A 2017 chassis belongs to the DPF, SCR, and DEF emissions era, but the engine data plate establishes the engine model year and certification. Obtain an ECM report showing total hours, idle time, fault history, and regeneration activity, then compare mileage against maintenance records. Look for documented DPF cleaning, DEF system repairs, cooling-system work, and transmission service. Start the engine cold and road-test under load to expose coolant loss, excessive crankcase pressure, shift problems, or aftertreatment warnings that may not appear during a yard inspection.

For northern US and Canadian service, inspect salt-exposed frame rails, crossmembers, brake plumbing, and electrical connectors, along with air dryers and cold-start equipment. Verify axle spacing and legal loaded weights for every intended state or province. Body-equipped 337s also need floor and liftgate inspections; tractors need fifth-wheel height, slider, jaw, and mounting checks.

Frequently Asked Questions about Used 2017 Peterbilt Conventional Day Cab Trucks

Is a 5.57 axle ratio too low for highway driving in a 2017 Peterbilt 337?

A 5.57 axle ratio favors loaded starts and stop-and-go work, but highway suitability also requires the transmission's top-gear ratio and tire revolutions per mile. For a 2017 Peterbilt 337, calculate engine rpm at the intended cruising speed rather than rejecting or approving the axle ratio by itself. Confirm the result against the engine manufacturer's recommended operating range, particularly if the route includes extended interstate travel.

Can a used 2017 Peterbilt day cab operate in California?

A 2017 Peterbilt diesel day cab must meet California's applicable emissions requirements; chassis year alone does not establish compliance. California's Truck and Bus regulation generally requires a 2010-or-newer engine in diesel trucks over 14,000 pounds GVWR, subject to exemptions. Also verify Clean Truck Check registration, testing status, and emissions-system integrity before California operation. Use engine-family and compliance records rather than a dashboard with no warning lamps as proof.

What CDL do I need for a 2017 Peterbilt day cab?

A 2017 Peterbilt straight truck rated at 26,001 pounds GVWR or more generally requires a Class B CDL in the United States when not towing a trailer over 10,000 pounds GVWR. A combination rated at 26,001 pounds GCWR or more with a trailer over 10,000 pounds GVWR generally requires Class A. Check actual-weight triggers, air-brake restrictions, and provincial licence classes for Canadian operation; a 337 badge alone does not establish the licence required.

Is an Allison automatic the same as an Eaton automated transmission in a 2017 Peterbilt?

An Allison torque-converter automatic and an Eaton automated manual are different transmission designs, even when both have push-button selectors. On a used 2017 Peterbilt, identify the exact transmission model before comparing drivability or service needs. An Allison inspection should include fluid condition, shift quality, and evidence of overheating; an automated manual inspection should include clutch wear data, actuator faults, and engagement behavior during backing and loaded starts.

Does a successful forced regeneration prove a 2017 Peterbilt's DPF is good?

A forced regeneration alone does not prove that a 2017 Peterbilt's DPF is healthy because regeneration burns soot, not accumulated ash. Ask for filter-cleaning records and diagnostic measurements of restriction or differential pressure under specified test conditions. Repeated regeneration requests can also come from failed sensors, exhaust leaks, poor engine temperature control, or fueling problems. Diagnose the cause before treating a cleaned or replaced filter as a permanent repair.