New 2027 Mack Rollback Trucks For Sale
Have new 2027 mack rollback truck to sell? List it here to reach thousands of buyers.
New 2027 Mack Rollback Trucks
The biggest buying decisions usually come down to bed length, deck material, and suspension spec. Many Mack rollback trucks in this class use 20-foot or 22-foot Jerr-Dan carrier bodies, often in XLP or low-center-gravity designs that improve loading angle for low-clearance cars and specialty vehicles. A 102-inch-wide deck gives more flexibility for pickups and wider loads, while 96-inch bodies can still make sense in tighter urban service. Steel decks generally cost less up front and hold up well in hard commercial use, while aluminum decks reduce curb weight and can help with payload and corrosion resistance. Common towing equipment includes an 8,000 lb winch, a 3,500 lb wheel-lift with L-arms, removable or fixed rails, tunnel boxes, and side-mounted tool storage.
Chassis details matter on a rollback because they affect ride quality, driver fatigue, and loading stability. Air brakes are typical at this GVWR, and buyers will often compare air ride suspension against spring suspension depending on route type and maintenance preference. Air ride can improve ride quality and vehicle handling with a load on the deck, while spring suspension remains a simpler, durable choice for some fleets. Low-profile 22.5 tires, differential lock, aluminum fuel tanks, heated power mirrors, and air ride driver seats are all useful features on a tow truck that spends long hours in traffic, on shoulders, and at uneven pickup locations. If the truck will work nights or highway incidents, pay close attention to the light package, LED work lights, strobe placement, and wireless remote capability for bed functions.
A Mack rollback is also known as a car carrier, carrier wrecker, flatbed tow truck, or rollback tow truck, but the right spec depends on the jobs you run most often. Standard open carriers fit general towing and transport work, while enclosed rollback upfits are more specialized for protected vehicle hauling, motorsports, exotic cars, or secure transport. Buyers should confirm deck rating, wheel-lift capacity, storage layout, rear axle rating, and overall body dimensions before choosing between similar trucks. For most operators, the best 2027 Mack rollback truck is the one with the right carrier length, enough tool storage, a low loading angle, and a chassis spec that matches the weight and frequency of the vehicles being recovered.
Frequently Asked Questions about New 2027 Mack Rollback Trucks
What is the typical chassis and powertrain setup on a new Mack rollback truck?
Most new Mack rollback trucks in this class are built on the MD6 chassis with a 26,000 lb GVWR, a Cummins 6.7L diesel around 300 HP, and an Allison 2500RDS automatic transmission. Air brakes are common, and buyers will often see either air ride or spring suspension depending on the intended service. This combination is popular because it gives reliable medium-duty towing performance without moving into a heavier Class 8 carrier.
Is a 20-foot or 22-foot rollback bed better on a Mack MD6?
A 20-foot bed can be a strong choice for tighter urban work and easier maneuvering, but a 22-foot bed usually gives more flexibility for longer vehicles, pickups, and better weight placement on the deck. The right answer depends on the mix of cars, SUVs, light trucks, and specialty units you haul. Buyers who regularly transport larger vehicles often prefer the extra deck length and 102-inch width when available.
Should I choose a steel or aluminum rollback body?
Steel rollback bodies are typically less expensive up front and are well suited for hard-use commercial towing. Aluminum bodies reduce weight, which can help available payload, and they offer a corrosion advantage in wet or salted environments. The tradeoff usually comes down to budget, operating environment, and how much importance you place on weight savings versus lower acquisition cost.
What wheel-lift and winch capacities are common on Mack rollback trucks?
A common configuration in this category includes a 3,500 lb wheel-lift and an 8,000 lb winch. That setup covers a large share of passenger vehicle and light truck recovery work. Buyers should still match the carrier body rating, wheel-lift design, and winch spec to the actual vehicles being towed, especially if the truck will see frequent SUV, van, or pickup recoveries.
Are Mack rollback trucks good for enclosed carrier applications?
Yes, the Mack MD6 platform can also be used for enclosed rollback or enclosed car carrier upfits when the job requires weather protection, added security, or a more specialized transport setup. These builds are often used for exotic vehicles, collector cars, motorsports support, and protected delivery work. The buyer should pay close attention to box dimensions, added body weight, access doors, camera systems, and how the enclosed upfit affects payload and deck operation.