2024 Western Star 4700SF

Category, Trucks. Mileage profile, 142,027 miles on a dump application points to a working duty cycle with frequent stops, PTO time, and chassis articulation, the kind of use that shows up first in suspension bushings, steering joints, driveline slip yokes, and dump body hinge points. Serial 5KKSBPDV7RLVB9943, stock 0636053. Powertrain, engine, transmission, axle ratio, and PTO spec are not provided, so the evaluation stays at chassis level, verify PTO engagement quality, listen for gear rollover at idle, and confirm no driveline vibration under load. Service access, check for seepage at engine front cover, rear main area, transmission tail, and axle pinion seals, then confirm DEF aftertreatment status and any active or stored faults with a scan since ECM data is not listed. Frame rails, look for paint rub-through, flange cracks around suspension hangers, and any added holes or welds near the rear section where dump bodies and hoists load the chassis. Hoist mounts and body pivots, inspect pin bores for egg-shaping, check cylinder rod condition for pitting, and verify body-to-frame clearance at full raise. Cab upholstery and controls, confirm switch labeling for PTO and hoist functions, check HVAC performance, and note pedal and seat wear as a quick indicator of operator hours beyond what mileage alone shows.