Skip to main content
Sell
Sell

Used 2016 Hino Trucks For Sale in New York

Compare used 2016 Hino trucks for sale in New York by engine, GVWR and body fit, with checks for salt corrosion, emissions systems and service history.

Top Categories
3 Listings

Selling a used 2016 hino truck? List your used 2016 hino truck for sale and reach thousands of commercial buyers.

Used 2016 Hino Trucks in New York

Road-salt exposure and stop-and-go duty deserve close attention when comparing used 2016 Hino trucks for sale in New York. Hino's 2016 lineup spans cabover models such as the 155 and 195 and conventional models including the 258, 268 and 338. The cabovers suit tight delivery routes, while conventional chassis support longer bodies and heavier vocational work. Compare box trucks, reefers, flatbeds, dump trucks and service bodies by wheelbase, cab-to-axle dimension, axle ratings and finished working weight, not body length alone.

Powertrain choice separates these chassis as much as GVWR. The cabovers commonly pair Hino's J05E four-cylinder diesel with an Aisin automatic, while conventional models commonly use the J08E six-cylinder and Allison automatics. A 2016 diesel belongs to the DPF and SCR emissions era and uses DEF. Request engine and transmission service records plus an ECM scan showing fault history and operating hours. Repeated regeneration complaints warrant diagnosis of the underlying fault, not an assumption that a cleaned DPF solves everything. Confirm completed emissions repairs against invoices and inspect for tampering before purchase.

New York winter exposure calls for close inspection of frame rails, crossmembers, spring hangers, brake lines, electrical grounds and body mounts. Scale between frame layers and freshly coated repairs deserve more scrutiny than surface rust. New York City delivery routes put a premium on overall height, turning clearance and liftgate operation; I-87 and I-90 regional work makes gearing, cooling performance and sustained highway behavior more important. Agricultural and construction work upstate also demands appropriate traction, ground clearance and body mounting.

A loaded road test is more useful than an empty trip around the yard. Check cold starting, blow-by, coolant condition, transmission shifts, steering play and brake operation, then evaluate the installed body separately: floors and door tracks on dry vans, temperature pull-down on reefers, or hoist pins and subframes on dumps. At this age, documented cooling-system, suspension and aftertreatment repairs matter more than a clean cab or a low odometer reading alone.

Frequently Asked Questions about Used 2016 Hino Trucks in New York

Do I need a CDL to drive a 2016 Hino truck in New York?

A single 2016 Hino with a GVWR or actual gross weight of 26,001 pounds or more generally requires a Class B CDL in New York. Lower-rated trucks used for ordinary freight usually fall below that threshold. Placarded hazardous materials or passenger service can trigger CDL requirements at lower weights, while towing a trailer over 10,000 pounds can require Class A licensing when the combination meets the CDL weight threshold.

Does a 2016 Hino need a diesel emissions inspection in New York?

A diesel 2016 Hino over 8,500 pounds GVWR registered in the New York Metropolitan Area requires an annual diesel emissions inspection. That area includes New York City's five boroughs plus Nassau, Suffolk, Rockland and Westchester counties. New York safety inspection requirements also apply. Registration location matters, so an upstate truck should not be assumed to have the same emissions inspection requirement as an otherwise identical truck registered downstate.

How do I calculate the payload of a used 2016 Hino?

Subtract the Hino's actual ready-to-work scale weight from its GVWR to establish the gross-weight payload allowance. Include fuel, driver, tools, liftgate and permanently installed equipment in that scale weight. Front and rear axle ratings, tire capacities and legal road limits can reduce usable payload further. Obtain individual axle weights because a long body or heavy rear-mounted liftgate can overload the rear axle before the truck reaches GVWR.

Can I add a dump body or hydraulic equipment to a 2016 Hino chassis?

A body conversion requires compatible chassis dimensions, sufficient axle capacity and a suitable hydraulic power source. Verify the exact transmission model and PTO provisions rather than assuming every automatic transmission accepts the same equipment. A qualified upfitter should check cab-to-axle length, frame condition, subframe design, driveline clearance and loaded axle distribution. Confirm that the converted Hino's certification and registered configuration satisfy the requirements for its intended operation.