Used 2013 Forklifts For Sale
Used 2013 forklifts for sale: compare propane, electric, and diesel lift trucks by capacity, mast clearance, emissions labels, and service history.
Selling a used 2013 forklift? List your used 2013 forklift for sale and reach thousands of commercial buyers.
Used 2013 Forklifts
Maintenance records for a 2013 lift truck should document battery replacements, transmission service, and mast repairs where applicable. Compare hour-meter readings with service records and ECM hours where accessible. Test travel engagement cold and hot, steering play, brake holding, mast-chain wear, and hydraulic drift under a controlled load. Electric models need a battery load test; propane models warrant cold-start and fuel-system checks. Across the United States and Canada, inspect salt-exposed frames, axle mounts, and electrical connectors for corrosion, and verify cold-weather starting equipment for outdoor service.
Frequently Asked Questions about Used 2013 Forklifts
Can a 5,000-pound 2013 forklift lift a 5,000-pound load?
Yes, but a 5,000-pound-rated 2013 forklift can handle that load only within the load center, lift height, and attachment configuration shown on its capacity plate. Many counterbalance forklifts use a 24-inch rated load center, but the plate controls. Longer loads move the center of gravity forward, while attachments add weight and can reduce allowable capacity.
Do I need a three-stage mast on a 2013 warehouse forklift?
A three-stage mast with full free lift suits warehouse work requiring high stacking combined with low doorway or trailer clearance. Free lift lets the forks rise a specified distance before the mast extends upward. Verify actual collapsed height, free-lift height, and maximum fork height because mast stage count alone does not establish clearance. A two-stage mast can suit lower racks and unrestricted overhead space.
Can I put a newer battery in a 2013 electric forklift?
Yes, a replacement battery must match the 2013 electric forklift's specified voltage, compartment dimensions, connector, and allowable battery weight. Battery mass forms part of the counterbalance on many electric lift trucks, so a lighter replacement can compromise stability. Confirm amp-hour capacity and charger compatibility before purchase, and obtain manufacturer guidance before converting from lead-acid to lithium power.
Do operators need training to run a used 2013 forklift in the US or Canada?
United States employers must provide forklift operator training and evaluation under OSHA 29 CFR 1910.178. A used 2013 forklift has no operator-training exemption based on age. OSHA requires operator evaluation at least once every three years, with refresher training triggered by specified circumstances. Canadian employers must follow the applicable federal, provincial, or territorial occupational safety requirements for operator training and competency.
How much fork wear is too much on a used 2013 forklift?
Forks worn to 90% or less of their original thickness should be removed from service. Have a qualified inspector measure the heel against the manufacturer's original dimension rather than assuming another section provides a valid reference. Cracks, permanent bending, mismatched forks, damaged retaining locks, and unauthorized welds also require evaluation before a used 2013 forklift returns to lifting work.