Skip to main content

25.0% Off All JulyCelebrating 250 years of independenceDiscount applied automatically, no code needed.

Read more
Trucker To TruckerTrucker To Trucker Logo

2014 Vacuum Trucks For Sale in Florida

Shop 2014 vacuum trucks for sewer cleaning, hydro excavation, and industrial cleanup. Compare tanks, jetter specs, blowers, and chassis setups.

Learn more

Have 2014 vacuum truck to sell? List it here to reach thousands of buyers.

About 2014 Vacuum Trucks in Florida

A 2014 vacuum truck is typically bought on the strength of its vacuum system, water system, and body configuration, not just the chassis badge. In this year range, many units are sewer cleaners or vacuum jetter combo trucks built on medium-duty and severe-duty platforms from makers like International, Peterbilt, Mack, and Sterling. Common setups include debris bodies around 10 to 12 cubic yards, freshwater capacity near 1,000 to 1,300 gallons, hydraulic hose reels, dump bodies, and rear door hydraulic locks. Buyers comparing 2014 vacuum trucks should look closely at blower or fan design, jetter pump output, PTO hours, and total engine hours, because those numbers often tell more about wear than mileage alone.

Frequently Asked Questions

1

What should I check first on a 2014 vacuum truck?

Start with the vacuum system and jetter package, because those components drive the truck’s earning ability and repair cost. Review engine hours, PTO hours, pump hours if available, and service history on the blower, fan, jetter pump, hose reel, and hydraulic systems. Also inspect the debris tank, rear door seals, dump hoist, valves, and plumbing for corrosion, leaks, and signs of patchwork repairs. A chassis with modest miles can still be a high-hour unit, so both road use and equipment use matter.

2

What are common specifications for a 2014 vacuum jetter combo truck?

A typical 2014 vacuum jetter combo truck often carries an 11 to 12 yard debris body and 1,000 to 1,300 gallons of fresh water. Many units are equipped with jetter pumps in the 50 to 80 GPM range at about 2,000 to 3,000 PSI, paired with either positive displacement blowers such as a Roots-style setup or multi-stage vacuum fans. Automatic transmissions are common, along with 22.5-inch rubber, hydraulic hose reels, hydraulic dump bodies, and rear door hydraulic locking systems.

3

Is a 2014 vacuum truck a good fit for municipal sewer cleaning work in Florida?

Yes, many 2014 vacuum trucks are well suited for municipal and contractor sewer cleaning, storm drain maintenance, lift station cleanup, and general catch basin work in Florida. The key is matching the truck’s water capacity, vacuum recovery rate, and hose reel setup to the type of work being performed. In Florida’s humid and coastal environments, buyers should pay extra attention to rust, tank condition, electrical connections, and corrosion on fittings, subframes, and hydraulic components.

4

What is the difference between a vacuum truck and a vacuum jetter combo truck?

A straight vacuum truck is built primarily to recover liquids, sludge, mud, and debris through suction. A vacuum jetter combo truck adds a high-pressure water system that can cut and flush sewer lines while the vacuum side recovers material. For sewer and drain cleaning, a combo truck is usually the more versatile choice. For bulk liquid recovery, industrial cleanup, or septic-style applications, a simpler vacuum-only truck can be the better fit.

5

Why do ex-municipal 2014 vacuum trucks attract buyers?

Ex-municipal vacuum trucks often appeal to buyers because they were commonly maintained on scheduled service intervals and spec’d for consistent public works use. Many also have documented hours, fleet records, and standardized equipment packages that make comparison easier. The tradeoff is that municipal use can include long idle periods, frequent PTO operation, and stop-and-go duty cycles, so inspection should focus on hours, pump condition, hydraulic wear, and tank integrity rather than appearance alone.