Skip to main content

25.0% Off All SummerCelebrating 250 years of independenceDiscount applied automatically, no code needed.

Read more

2027 Stoughton Trailers For Sale in Kansas

Shop 2027 Stoughton trailers for sale in Kansas, including grain hopper trailers with aluminum construction, air ride suspension, and high-capacity specs.

Learn more
Top Categories
3 Listings

Have 2027 stoughton trailer to sell? List it here to reach thousands of buyers.

About 2027 Stoughton Trailers in Kansas

For buyers comparing 2027 Stoughton trailers for sale in Kansas, grain hopper configurations stand out for payload efficiency, corrosion resistance, and farm-to-elevator practicality. Stoughton aluminum hoppers are built around high-capacity grain work, with common lengths around 40 to 43 feet, side heights from the upper 60-inch range into the 80-inch range, and capacities that can run from roughly 1,370 to 1,757 cubic feet, or about 1,100 to 1,412 bushels depending on setup. That puts the focus on matching trailer volume to your commodity mix, legal weight targets, and the height restrictions you deal with at bins, elevators, and older sheds.

Construction details matter on this class of trailer. A typical Stoughton grain hopper uses aluminum sidewalls and front panels to keep tare weight down, along with a galvanized steel subframe and landing gear for durability in corrosive environments. Buyers should pay close attention to wall style, post spacing, and rear wall construction. Flat or corrugated aluminum sidewalls, stainless steel rear wall sections, stainless corner panels, and removable inner liners all affect long-term cleanout, sidewall rigidity, and resistance to wear from grain, feed, and fertilizer-related service. Estimated empty weights in the high-8,000 to mid-9,000 pound range are common on this type of spec, which can make a real difference if every pound of legal payload counts.

Running gear on these trailers is typically straightforward and field-proven. Tandem axles with a 49-inch spread, air ride suspension, drum brakes, 2S1M ABS, 11R22.5 tires, and aluminum wheels are common specs in this segment. Fifth wheel height, kingpin setting, and ground clearance should be reviewed carefully if the trailer will be paired with multiple tractors or used on uneven approaches. A 20-inch kingpin setting and 47- to 48-inch fifth wheel height are typical numbers buyers will see. For unload performance, many grain hoppers in this class use 2-stage manual trapdoors with large trap openings sized for fast discharge while still giving the operator control at pits and augers.

Kansas buyers often prioritize weather protection, visibility, and serviceability because these trailers spend time on highways, county roads, and in harvest conditions that are hard on equipment. Electric tarp systems with remote operation, LED lighting with security rings, front and rear ladders, anti-spray splash guards, and optional tire inflation systems are all practical features, not cosmetic ones. The right 2027 Stoughton trailer comes down to balancing cubic capacity, tare weight, side height, and unload setup against the crops you haul and the roads you run. If the job is grain, seed, or other bulk agricultural commodities, a properly spec'd Stoughton hopper trailer is designed to stay light, clean out efficiently, and hold up through repeated seasonal use.

Frequently Asked Questions

What are the most important specs to compare on a 2027 Stoughton grain hopper trailer?

The main specs are trailer length, side height, cubic capacity, empty weight, suspension type, trapdoor size, and overall height. Length and side height determine bushel capacity, but they also affect tare weight and clearance under bins or at facilities. Buyers should also verify kingpin setting, fifth wheel height, axle spread, and ground clearance to make sure the trailer matches their tractors and operating environment.

Are Stoughton aluminum hopper trailers a good fit for grain hauling in Kansas?

Yes. Aluminum hopper trailers are a strong fit for Kansas grain work because they keep trailer weight down and resist corrosion better than heavier all-steel designs. That lower tare weight can help maximize legal payload, and the hopper design supports efficient unloading at elevators, pits, and augers. For operations dealing with long harvest routes, mixed road conditions, and seasonal exposure, galvanized and stainless components also add durability where rust and wear typically show up first.

What capacity range is common for Stoughton grain hopper trailers?

A common capacity range is roughly 1,370 to 1,757 cubic feet, or about 1,100 to 1,412 bushels, depending on trailer length and side height. A 40-foot trailer with shorter sides will generally suit operators who need lower overall height and lighter tare weight. A 42- or 43-foot trailer with taller sides is better suited for buyers prioritizing volume, as long as their freight, routes, and legal weight limits support the added capacity.

Why do kingpin setting and fifth wheel height matter on a hopper trailer?

Kingpin setting and fifth wheel height affect tractor clearance, bridge law compliance, turning room, and how the trailer sits when loaded. On a grain hopper, those dimensions also influence driveline compatibility across a fleet and how the trailer handles on uneven field entrances or steep approaches. Matching these measurements to your tractors helps avoid interference issues and can improve weight distribution on the steer and drive axles.

What features improve day-to-day use on a grain hopper trailer?

Electric tarp systems, large trapdoor openings, air ride suspension, LED lighting, ladders, anti-spray splash guards, and tire inflation systems all improve daily operation. An electric tarp speeds loading and protects grain from weather. Large trap openings help unload faster and more cleanly. Air ride helps protect the trailer and cargo on rough roads, while better lighting and access features make the trailer easier and safer to use during harvest and after dark.