Used Doosan Forklifts For Sale
Used Doosan forklifts for sale: compare GC, G, D and B models, verify rated capacity, and inspect engines, mast wear and batteries before buying.
Showing 1 to 28 of 32 results
Selling a used doosan forklift? List your used doosan forklift for sale and reach thousands of commercial buyers.
Used Doosan Forklifts
Rated capacity at the actual load center and lift height matters more than the number in a model designation. Read the Doosan data plate with the installed mast, forks and attachment in mind; a sideshifter or fork positioner can reduce usable capacity. Measure lowered mast height, free lift, aisle turning clearance and fork length against doorways, trailers, racks and pallets.
Cold-start an LPG or diesel Doosan, then test travel, braking, steering and lifting under load after the machine reaches operating temperature. Inspect mast rollers, chain elongation, carriage play, fork heels and tilt-cylinder mounts; dry cylinder rods alone do not establish hydraulic condition. Compare hour-meter readings with service records and available controller or ECM information, especially if the display has been replaced. On older GC models, check engine fault codes, cooling-system condition, transmission engagement and brake performance. For electrics, require a battery capacity test and inspect charger compatibility, connectors and cable insulation before judging the truck by its appearance.
Across the United States and Canada, previous working conditions can matter as much as model year. Salt exposure calls for close inspection of chassis corrosion, brake hardware and electrical connections, while cold-weather duty demands reliable starting and suitable hydraulic fluids. Confirm the emissions label on combustion models rather than applying highway-truck model-year rules. Operator training, daily inspections and workplace suitability remain employer responsibilities under applicable US or Canadian requirements.
Frequently Asked Questions about Used Doosan Forklifts
What should I check if a used Doosan GC25P-5 has an engine warning light?
Read the stored engine fault codes before treating a Doosan GC25P-5 warning light as a minor sensor issue. On GM-powered LPG versions, verify ignition performance, fuel-system operation and wiring condition, then confirm the engine runs cleanly under load. A misfire can damage the exhaust catalyst, so a forklift that starts and moves still needs diagnosis before returning to service.
Do older Doosan forklifts use the same parts across model years?
No, matching the Doosan model name alone is not enough to order replacement parts. Use the forklift serial number, engine identification and mast identification, because production changes can affect filters, brake components, seals and electrical parts. Verify attachment specifications separately. Obtain the applicable parts book before committing to a major repair or buying a nonrunning forklift.
How do I choose a replacement battery for a used Doosan electric forklift?
Match the Doosan electric forklift's battery voltage, approved battery weight range and compartment dimensions before considering a replacement battery. Battery weight can be part of the truck's counterbalance, so a lighter substitute is not automatically acceptable. For a used lead-acid pack, have a battery technician document capacity, cell voltage balance and condition under load, and confirm charger compatibility with the battery and facility electrical service.
How much fork wear is acceptable on a used Doosan forklift?
A 10% loss of fork blade thickness is a commonly accepted removal-from-service threshold for used Doosan forklifts. Have a qualified inspector compare the worn heel area with the original specification or an appropriate unworn reference section, and check for cracks, bent blades and uneven tip heights. Follow the fork manufacturer's inspection limits, and never attempt unapproved straightening or welding repairs.
Do I need a CDL or certification to operate a Doosan forklift?
A CDL is not normally required to operate a Doosan forklift within a workplace, but operator training and evaluation are required. In the United States, OSHA requires employers to certify that powered industrial truck operators have been trained and evaluated, with performance evaluation at least every three years. Canadian requirements follow the applicable provincial or federal workplace rules; prior forklift experience alone does not establish qualification.