2014 Doosan Forklifts For Sale
Compare 2014 Doosan forklifts for sale by tire type, mast clearance, capacity plate, LPG diagnostics, and service history before choosing a lift truck.
Selling a 2014 doosan forklift? List your 2014 doosan forklift for sale and reach thousands of commercial buyers.
2014 Doosan Forklifts
The capacity plate, not the model number, determines what a Doosan lift truck can safely lift with its installed mast and attachments. Match rated capacity and load center to the heaviest pallet, then verify maximum lift height, lowered mast height, free lift, and aisle turning clearance against the building and racking. A sideshifter or fork positioner can reduce residual capacity, so the plate must identify the actual configuration rather than the truck's original bare-fork rating.
On a used 2014 machine, documented maintenance matters more than a clean repaint or a low dashboard reading. Compare hour-meter readings with service invoices and any available engine-controller hours, especially if the meter has been replaced. Start the engine cold, scan active and stored faults, and repeat the operating test after the engine and transmission reach working temperature. Check forward and reverse engagement, brake holding, steering travel in both directions, and hydraulic performance under a suitable test load. Inspect mast rollers, chain anchors, carriage play, fork heels, cylinder rods, and steer-axle pivots. Aging LPG hoses, cooling components, seals, and wiring deserve attention even on lightly used equipment.
Across the United States and Canada, indoor ventilation and outdoor weather change the right specification. LPG exhaust still creates a carbon monoxide exposure risk, while a battery-electric fork truck requires verified battery condition, a compatible charger, and adequate charging infrastructure. Cold-weather operation calls for checks of starting performance, coolant protection, and hydraulic response; salted yards warrant close inspection of chassis corrosion and electrical connections. A 2014 diesel forklift falls under nonroad engine emissions requirements, not highway-truck emissions rules. Verify the engine emissions label and installed equipment rather than assuming a particular Tier standard or DEF system from the forklift's model year.
For a 2014 machine represented as new or unused, treat the configuration as a completed build, not a current factory order. Confirm storage history, commissioning requirements, and written warranty eligibility, including the coverage start date; unused equipment can still need hoses, tires, seals, or batteries replaced. Ordinary off-highway forklifts are not subject to the 12% federal excise tax imposed on qualifying new heavy highway trucks and trailers.
Frequently Asked Questions about 2014 Doosan Forklifts
How do I calculate load center for a 2014 Doosan forklift?
A centered, uniformly loaded 48-inch-deep pallet has a 24-inch load center, measured horizontally from the vertical fork face. A similarly loaded 72-inch-deep pallet has a 36-inch load center and requires a lower allowable load unless the capacity plate specifically permits it. For a 2014 Doosan forklift carrying uneven loads or attachments, use the actual center of gravity and obtain an approved capacity rating rather than estimating from pallet dimensions alone.
When do the forks on a used Doosan forklift need replacing?
Forks with 10% wear from their original blade or heel thickness must be removed from service under commonly applied forklift inspection criteria. A qualified inspector should also check a used Doosan forklift's forks for cracks, permanent bending, unequal tip heights, and damaged positioning locks. Establish the original thickness from manufacturer specifications or a reliable unworn reference, and replace forks with a correctly rated matched pair.
Should I buy a 2014 Doosan LPG forklift with the check-engine light on?
An illuminated check-engine light on a 2014 Doosan LPG forklift warrants diagnosis before purchase, even if the engine starts and lifts normally. Obtain the fault codes and a written repair assessment, then verify operation after repairs. Fuel-pressure faults, ignition problems, and oxygen-sensor issues require different repairs. Include a hot restart and sustained loaded operation in the test because a brief idle check can miss temperature-related faults.
Do I need a CDL to operate a Doosan forklift in a warehouse?
A CDL is not the operating credential for a Doosan forklift working inside a warehouse or plant. In the United States, OSHA requires employer-provided operator training and evaluation, with operator performance evaluated at least once every three years and refresher training triggered by specified events. Canadian employers must follow the applicable provincial or territorial occupational safety requirements. Training must address the forklift type and actual workplace hazards.
What weight should I use when choosing a trailer to transport a Doosan forklift?
Use the Doosan forklift's actual transport weight, not its lifting capacity, when selecting a trailer and tow vehicle. Counterweights make lift trucks substantially heavier than the loads they are rated to lift. Account for installed attachments and, on electric models, the traction battery. Verify trailer payload, axle loading, deck strength, ramp ratings, loaded height, and approved securement points before arranging transport.