Used 2012 Recycling For Sale in New York
Browse used 2012 recycling equipment including material handlers, magnets, and scrap attachments built for yard, transfer, and processing work.
Learn more
Have used 2012 recycling equipment to sell? List it here to reach thousands of buyers.
About Used 2012 Recycling in New York
For scrap and recycling duty, reach and attachment support matter as much as engine horsepower. Many 2012 machines in this category fall in the roughly 150 to 250 horsepower range and may include 30-foot to 45-foot working reach depending on boom and stick combination. A wheeled material handler is often preferred for paved yards and fast repositioning, especially when equipped with hydraulic outriggers and an elevating cab for pile visibility. A crawler setup can make more sense for heavier demolition scrap, rough ground, or stationary feeding work. Generator packages for magnets are common and should be checked closely, especially output rating, wiring condition, and how the system is integrated with the upper. Buyers comparing grapple, magnet, shear, or orange-peel configurations should also confirm auxiliary hydraulics, rotator function, coupler setup, and whether the attachment is included or priced separately.
Condition on used 2012 recycling equipment should be evaluated around structural wear and hydraulic health before cosmetics. Pay close attention to boom and stick pin play, turntable bearing condition, cylinder seepage, hydraulic pump response, swing performance, and any signs of frame or outrigger stress. On wheeled handlers, inspect tire size and condition, rim type, steering response, axle wear, and brake function. On tracked machines, undercarriage wear can change the economics quickly. Cab systems also matter more than many buyers expect because recycling work depends on operator sightlines and comfort over long shifts. Features like backup cameras, adjustable cab height, heat and air conditioning, and responsive joysticks can make a meaningful difference in productivity.
Transport dimensions, operating weight, and regional service support are also part of the buying decision. Many 2012 recycling machines are heavy enough to require careful hauling plans, and widths around 9 to 11 feet and operating weights well above 50,000 pounds are common. In New York and the Northeast, buyers often favor machines that can handle dense scrap streams, cold-weather starts, and frequent loading cycles without excessive idle time. A good used recycling machine should match the yard layout, expected tonnage, and primary material stream, whether that is ferrous scrap, mixed metal, C&D material, or transfer-station waste. The best value usually comes from a machine with the right reach, a proven magnet or grapple setup, and documented maintenance on the hydraulic and rotating components.
Frequently Asked Questions
What types of used 2012 recycling equipment are most common on the market?
The most common used 2012 recycling equipment includes wheeled material handlers, crawler material handlers, excavator-based scrap machines, lifting magnets, grapples, and shear attachments. Material handlers are the core machines for sorting, loading, and feeding scrap, while magnets and grapples are common attachment choices depending on whether the yard handles ferrous metal, mixed debris, or bulky scrap. Some machines are purpose-built scrap handlers, and others are excavators adapted for recycling duty with generators, guarding, and attachment plumbing.
Is a wheeled or tracked material handler better for recycling work?
A wheeled material handler is usually the better fit for paved scrap yards where mobility, quick repositioning, and lower ground disturbance matter. A tracked machine is often better on uneven ground, in heavier demolition applications, or where the machine will spend more time planted in one area feeding a shredder, shear, or stockpile. The right choice depends on surface conditions, travel frequency, pile height, and how aggressively the machine will be used during the shift.
What should I inspect first on used 2012 recycling equipment?
Start with the boom, stick, pins, bushings, swing bearing, cylinders, hydraulic pumps, and attachment circuits because those components drive productivity and repair cost. On magnet-equipped machines, inspect the generator, controls, cable routing, and magnet connection points. If the machine is wheeled, look closely at tires, axles, steering, and outriggers. If it is tracked, measure undercarriage wear. Structural cracks, excessive slop, weak hydraulics, and poor swing performance are usually more important than faded paint or cosmetic cab wear.
How much reach and lifting capability do recycling material handlers usually have?
Used 2012 recycling material handlers commonly offer working reach from about 30 feet to 45 feet, depending on boom and stick configuration. Lifting capability depends on machine weight, undercarriage or wheelbase design, counterweight, and whether outriggers are deployed. Buyers should match reach and lift needs to the actual job, because a longer reach helps with pile management and trailer loading, but it can also affect stability and cycle speed if the machine is undersized for the attachment or material stream.
Do generator and magnet packages add real value on a used recycling machine?
Yes, a functioning generator and magnet package can add significant value if ferrous handling is part of the operation. A factory-integrated or properly installed generator setup can save time and expense compared with adding one later. The value depends on output rating, duty cycle, control function, and the condition of the electrical system. Buyers should confirm whether the magnet itself is included, because some listings include only the generator and controls while the magnet is sold separately.