Used 2007 Lifts - Fork For Sale
Browse used 2007 fork lifts for sale, including LPG and diesel forklifts with common specs, lift capacities, mast types, and warehouse-ready features.
Learn more
Showing 1 to 12 of 18 results
Have used 2007 lifts - fork equipment to sell? List it here to reach thousands of buyers.
About Used 2007 Lifts - Fork
A 2007 forklift can still be a strong value if the mast, carriage, steer axle, transmission, and hydraulic system are in good working order. On units from this era, pay close attention to hour meter readings, cylinder seepage, chain wear, side shift operation, brake response, and mast staging under load. Common specs include dual mast or triple mast setups, back tilt in the 5 to 8 degree range, fork lengths around 41 inches on smaller warehouse units, and operating weights from roughly 7,500 to 8,700 lb in the 4,000 to 5,000 lb class. If the truck is missing forks, verify carriage class and fork dimensions before pricing replacements.
Application matters more than brand loyalty in this category. Cushion-tire forklifts, also known as warehouse forklifts, are typically chosen for smooth concrete floors, trailers, and tight indoor turning. Pneumatic-tire forklifts are better suited to uneven yards, pipe lots, lumber yards, and mixed indoor-outdoor use. Buyers also need to match lowered mast height to door clearance and rack access, especially if the truck will work inside containers or standard warehouse openings. A lower collapsed height may matter more than maximum lift if the forklift spends most of its day entering trailers.
For a used 2007 fork lift, the best buying decision usually comes down to serviceability and attachment needs. Side shift is one of the most useful options in real-world loading because it reduces repositioning time and rack contact. A 4th valve can add flexibility for clamps or other hydraulic attachments. Propane units remain popular for cleaner operation and fast refueling, while diesel is often preferred for heavier outdoor work. Parts support is still strong for major makes like Toyota, Clark, Mitsubishi, Doosan, and similar fleet brands, but condition should drive the deal. A clean-running forklift with dry hydraulics, stable lift, predictable braking, and the right mast for your building will usually outperform a cheaper unit that needs immediate repair.
Frequently Asked Questions
What lift capacity is common for used 2007 fork lifts?
Many used 2007 fork lifts on the market are in the 4,000 to 5,000 lb range, which is common for warehouse, dock, and trailer loading work. Heavier units are also available, especially diesel models with pneumatic tires, and these may reach 9,000 lb or more. Buyers should size capacity to the actual load center and attachment setup, because a forklift rated at a certain capacity may lift less once a side shift, clamp, or longer forks are installed.
Should I choose a propane or diesel 2007 forklift?
Propane forklifts are widely used indoors and around loading docks because they refuel quickly, run cleaner than diesel, and are common in the 4,000 to 5,000 lb cushion-tire class. Diesel forklifts are usually a better fit for outdoor yards, heavier capacities, and longer-duty applications where torque and runtime matter. The best choice depends on ventilation, floor surface, lift capacity requirement, and whether the truck will spend most of its time inside a warehouse or outside on gravel, asphalt, or packed dirt.
What should I inspect on a used 2007 forklift before buying?
Focus on the mast, chains, rollers, hydraulic cylinders, transmission response, brakes, steer axle, and tire condition. Check for cylinder leaks, mast chatter, hard shifting, weak braking, and uneven tire wear. Confirm that side shift, tilt, lift, and any auxiliary valves work smoothly through the full range. It is also important to verify hour meter credibility, serial plate information, fork condition, and whether the collapsed mast height and maximum lift height match the work environment.
What is the difference between a dual mast and a triple mast on a forklift?
A dual mast, sometimes called a two-stage mast, is simpler and often preferred when lower cost and straightforward service are priorities. A triple mast, or three-stage mast, allows higher lift heights while maintaining a relatively low collapsed height, which helps in warehouses with overhead door or trailer clearance limits. The right mast depends on racking height, trailer loading needs, and how often the forklift must operate in low-clearance areas.
Are parts still available for major 2007 forklift brands?
Yes, parts support is generally still good for established forklift manufacturers such as Toyota, Clark, Mitsubishi, and Doosan. Common wear items like filters, brakes, seals, hoses, tires, chains, and ignition components are usually obtainable through dealer networks and aftermarket suppliers. Attachment compatibility, mast parts availability, and engine-specific components should still be confirmed before purchase, especially on older or less common configurations.