2017 Kenworth T880

Category, Truck (dump spec). Mileage at 315,000 points to a working-duty cycle with typical vocational wear patterns, frame and suspension condition matter more than cosmetics at this stage. Serial 1NKZX4TX8HJ175863, stock B3532P. Powertrain details are not provided, so engine family, horsepower, transmission type, and axle ratio cannot be tied to a specific haul profile. ECM status is not listed, plan on verifying active and inactive fault history, aftertreatment health, and engine hours with a scan tool before putting it on a route. Frame rails, hoist mounts, and body hinge points are the first inspection stops on a dump application, look for cracking at crossmember ends, elongated bolt holes, and weld repairs around the rear suspension hangers and hoist saddle area. Fifth wheel is typically not in play here, so pay closer attention to rear frame kick-up, tailgate hardware, and any evidence of bed-to-cab contact. Cab upholstery, pedal wear, and steering column play help confirm the stated miles, while steering gear seepage, kingpin looseness, and spring pack condition show how it has lived in jobsite turns and uneven ground. Tires and brake hardware should be checked for heat checking and uneven wear that can flag alignment issues or bent components common to dump duty.