Used Chevrolet Chipper Trucks For Sale in Florida
Browse used Chevrolet chipper trucks in Florida. Compare Silverado 6500HD specs, chip box bodies, hoists, payload and arborist-ready setups.
Learn more
Have used chevrolet chipper truck to sell? List it here to reach thousands of buyers.
About Used Chevrolet Chipper Trucks in Florida
The body is where most of the category-specific value sits. Many chipper trucks use a high-side enclosed dump body, often around 12 to 16 feet long, with tall sidewalls, a full roof, rear barn doors, and a smooth interior designed to hold brush, chips, and light debris without hanging up badly during unloading. Aluminum bodies are popular because they help reduce empty weight and preserve payload, while steel substructure and crossmember design still matter for durability. Buyers should look closely at floor thickness, sidewall construction, bulkhead reinforcement, door framing, and hoist brand and capacity. An electric-over-hydraulic hoist is common in this class, and rear trailer hitches with 7-way plugs are especially important if the truck will regularly pull a wood chipper.
On the chassis side, Chevrolet medium-duty trucks in this segment are often equipped with the 6.6L Duramax diesel and an Allison automatic transmission, a combination many fleet operators prefer for stop-and-go tree work and less driver fatigue. A 4x2 layout is common and usually sufficient for paved and mixed suburban work, but tire condition, rear suspension rating, wheelbase, and brake spec deserve attention because body size can quickly consume available payload on a lower-GVWR truck. Florida buyers should also pay attention to corrosion resistance, cooling system condition, air conditioning performance, and signs of hard idle time or PTO and electrical wear from jobsite use. If the truck has a newer body on a used chassis, verify the upfit installation quality, frame condition, and how the hoist, lighting, and wiring were integrated.
The best used Chevrolet chipper truck is not just the newest one. It is the one matched to the way your crew loads, dumps, and tows every day. For tree contractors, that usually means enough side height and roof structure to maximize chip volume without creating a truck that is cumbersome in neighborhoods. For landscape and storm response work, fast dump cycles, solid rear door hardware, and a body that sheds wet material cleanly can matter more than cosmetic appearance. Review GVWR, axle ratings, body dimensions, hitch setup, and service history together so the truck works as a complete production unit rather than just a chassis with a box on it.
Frequently Asked Questions
What is a Chevrolet chipper truck used for?
A Chevrolet chipper truck is built to haul wood chips, brush, leaves, and light green waste generated by tree crews, arborists, and landscape contractors. Most are configured with a high-capacity enclosed chip box body and a rear hitch so the truck can tow a wood chipper to the jobsite. They are also used for storm cleanup, municipal parks work, and utility right-of-way trimming where frequent loading and dumping are part of the daily cycle.
What should I check first on a used chipper truck?
Start with the body and hoist, because that is where chipper trucks take the most application-specific abuse. Inspect the floor, crossmembers, sidewalls, roof, rear barn doors, hinges, and hoist mounts for cracking, distortion, or poor repairs. Then confirm the truck's GVWR and rear axle rating against the body size, and check the hitch, wiring, transmission operation, brake condition, and signs of excessive idle hours or hard fleet use.
Is an aluminum chipper body better than steel?
Aluminum chipper bodies are popular because they reduce empty weight and can improve legal payload on a medium-duty chassis. That makes them attractive for crews carrying bulky but relatively light material like chips and brush. Steel can offer advantages in impact resistance and repair familiarity, but it usually adds weight. The better choice depends on payload targets, operating environment, repair resources, and the quality of the body's substructure and construction.
Are Chevrolet Silverado 6500HD chipper trucks a good fit for tree service work?
Yes, the Silverado 6500HD is a strong match for many tree service and landscape fleets that need medium-duty capability without stepping into a larger cab-over or tandem application. With the 6.6L Duramax diesel, Allison automatic, and commercial chassis ratings, it can support a substantial chip body while remaining maneuverable in residential areas. The key is making sure the wheelbase, body length, and axle ratings are properly matched so the truck can tow a chipper and still carry a useful load.
Why does body size matter so much on a chipper truck?
Body size directly affects productivity, legal payload, and how the truck handles in tight work zones. Tall sidewalls and a full roof increase cubic capacity for chips and brush, but a larger body also adds weight and can reduce payload margin if the chassis is undersized. Buyers should compare body length, side height, floor material, and hoist setup against the truck's GVWR and intended routes so the unit is efficient, stable, and easy for the crew to work around.