New Chevrolet Chipper Trucks For Sale
New Chevrolet chipper trucks with diesel power, dump bodies, and chip boxes built for arborist, tree service, and landscape hauling.
Learn more![[Vehicle] 2023 Chevrolet Silverado 6500HD dump truck with bed raised showing hydraulic system and chassis.](https://cdn.truckertotrucker.com/large/a1775d58-6c91-43e4-99c5844caa3d7d49.jpg)
Have new chevrolet chipper truck to sell? List it here to reach thousands of buyers.
About New Chevrolet Chipper Trucks
The body matters as much as the chassis. A typical new chipper truck setup uses a 14 to 16 foot chip body with high side walls, an enclosed roof, rear barn doors, and an electric-over-hydraulic hoist for dumping brush, chips, and light bulky debris. Aluminum bodies are popular because they help preserve payload and resist corrosion, while steel components may still be used in structural areas depending on the builder. Buyers should pay close attention to side wall height, roof construction, crossmember spacing, floor thickness, hoist capacity, and rear door design. If the truck will tow a wood chipper daily, check the hitch rating, trailer plug, brake controller provisions, and rear frame setup.
On the chassis side, Chevrolet medium-duty models are often chosen for the 6.6L Duramax diesel, Allison automatic transmission, straightforward cab layout, and broad dealer support. A 4x2 single-axle configuration is common for municipal and contractor work where maneuverability and lower acquisition cost matter more than off-road traction. GVWR, wheelbase, suspension, axle ratings, and tire size all affect how well the truck carries a tall chip body without feeling top-heavy or overloaded. If the truck will spend long days on residential streets, turning radius, cab visibility, and step-in height are practical buying points. If it will run with a full crew and tools, account for passenger seating, lockable storage, and body access features before comparing units.
A well-spec'd new Chevrolet chipper truck should match the density of the material being hauled and the pace of the crew using it. Chips and brush are bulky, but they can still create stability and legal weight issues if the body is oversized for the chassis or if towing is added to the job. Buyers comparing listings should focus on body length, wall height, hoist type, chassis GVWR, diesel versus gas operating profile, and the presence of towing equipment more than cosmetic differences. The right setup gives an arborist or landscape operation a truck that loads fast, dumps cleanly, and stays productive with minimal downtime.
Frequently Asked Questions
What is a Chevrolet chipper truck used for?
A Chevrolet chipper truck is used to haul wood chips, brush, limbs, and other light-volume debris generated by tree care and landscaping work. Most are built for arborist crews that tow a wood chipper to the jobsite, feed material into the chipper, and blow the chips directly into the enclosed body. They are also used by municipal forestry departments, vegetation management contractors, and landscape companies that need a dump body with taller sides and more cube capacity than a standard contractor dump truck.
What should I look for when buying a new Chevrolet chipper truck?
Start with the relationship between chassis GVWR and body size. A tall 16-foot chip body may look ideal for volume, but the truck still needs enough suspension, axle, and tire capacity to carry the load safely and tow a chipper if required. Also review body material, floor thickness, side wall height, rear door design, hoist type, hitch setup, and electrical connections. For crew productivity, check cab configuration, visibility, service access, and how easily the truck can operate in tight residential streets and commercial properties.
Are aluminum chipper bodies better than steel?
Aluminum chipper bodies are popular because they reduce body weight and improve corrosion resistance, which can help preserve payload and extend service life. That makes them attractive for high-volume tree and landscape work where the truck handles bulky material every day. Steel can still be beneficial in high-wear structural areas or for buyers who prioritize impact resistance and lower repair complexity. The better choice depends on payload goals, operating environment, and how aggressively the body will be used.
Is a Chevrolet Silverado 6500HD a good platform for a chipper truck?
Yes, the Silverado 6500HD is a common medium-duty platform for chipper truck applications because it offers commercial-grade GVWR capacity, diesel power, automatic transmission availability, and familiar Chevrolet service support. It fits many single-axle chip body builds well and is especially useful for contractors and municipalities that want maneuverability without moving into a larger tandem-axle truck. The key is making sure the wheelbase, rear axle rating, and body dimensions are matched correctly for the intended payload and towing needs.
Can a chipper truck also be used as a landscape dump truck?
Yes, many chipper trucks can double as landscape dump trucks, especially when they have a dump hoist, rear barn doors, and a body suited for loose organic material. They work well for mulch, leaves, brush, and similar debris. However, they are not always the best choice for dense aggregates, demolition debris, or palletized materials because the tall enclosed body is optimized for volume rather than heavy concentrated loads. Buyers with mixed-use needs should compare chip body construction and legal payload carefully before choosing a dual-purpose setup.