Used PJ Utility Trailers For Sale
Browse used PJ utility trailers with common specs, payload insights, ramp and side options, and buying tips for landscaping and light equipment work.
Learn more
Have used pj utility trailer to sell? List it here to reach thousands of buyers.
About Used PJ Utility Trailers
A common setup in used PJ utility trailers is a single or tandem axle steel trailer with spring suspension, wood decking, and rear gate or mesh ramp access. Tandem axle models around 7,000 lb GVWR are especially common because they offer a good balance of payload capacity and towability behind a 1/2-ton or 3/4-ton pickup, depending on actual loaded weight and hitch setup. Buyers should look closely at trailer empty weight, axle tags, coupler size, brake configuration, and tire condition. On utility trailers, a few hundred pounds of empty weight can matter if you regularly haul zero-turn mowers, compact tractors, UTVs, palletized material, or small skid steer attachments.
PJ utility trailers are often found with steel formed sides, removable side rails, or side panels that double as loading ramps. That matters if the trailer needs to handle both loose material and wheeled equipment. Wood floors are common and easy to repair, but check for soft spots, fastener pull-through, and edge rot near the ramp transition. Steel frame condition is just as important. Inspect crossmembers, spring hangers, welds, fender mounts, and the rear gate structure for fatigue or impact damage. A used trailer with a solid frame, working breakaway system, good wiring, and healthy brakes is usually a better buy than one with fresh paint covering deferred maintenance.
If the trailer will spend time on mixed residential and commercial routes, pay attention to width, deck height, and ramp angle. A lower deck height helps with mower loading and reduces ramp breakover on low-clearance equipment. Tire size, wheel bolt pattern, and common replacement parts also matter if uptime is important. PJ utility trailers are also known as landscape trailers in many fleets, especially when equipped with expanded metal sides and rear mesh gates. The best used choice is the one sized for your real load, not your occasional maximum load, with enough GVWR, deck space, and ramp strength to work safely without towing more trailer than the job requires.
Frequently Asked Questions
What is a typical GVWR for a used PJ utility trailer?
A common rating is 7,000 lb GVWR on tandem axle models, though smaller single axle versions and heavier configurations are also available. The right rating depends on the trailer’s empty weight, the cargo you actually haul, and the tow vehicle’s hitch and towing limits. Buyers should verify the VIN tag and axle ratings rather than assuming capacity from appearance alone.
Are PJ utility trailers good for landscaping and mower hauling?
Yes. PJ utility trailers are widely used for landscaping because they often combine a manageable deck height, rear ramp or mesh gate access, and steel side structures that help contain tools and material. For mower work, pay attention to ramp angle, gate support, deck width between fenders if applicable, and the condition of the wood floor where heavy wheel traffic loads repeatedly.
What should I inspect on a used PJ utility trailer before buying?
Start with the frame, crossmembers, coupler, safety chains, jack, wiring, lights, brakes, and breakaway system. Then inspect the suspension, equalizers, spring hangers, tires, and wheel bearings for wear or deferred maintenance. On the body, check the ramp hinges, latch points, mesh gate frame, side rails, and decking condition, because utility trailers often show their hardest wear at the loading end and along the floor edges.
What is the difference between a utility trailer and a landscape trailer?
In many listings, the terms overlap. A utility trailer is the broader category, while a landscape trailer usually refers to a utility trailer set up with taller sides, expanded metal, trimmer racks, and a rear mesh gate for mowing and maintenance crews. Many PJ utility trailers can serve either role depending on the side design and how the trailer is equipped.
Does deck length matter much on a PJ utility trailer?
Yes. Deck length affects load placement, tongue weight, and how easily you can carry multiple machines or combine equipment with materials. A shorter trailer can be easier to maneuver in residential areas, while a longer deck gives more flexibility for zero-turn mowers, UTVs, compact tractors, or mixed loads. Buyers should match deck length to their most frequent cargo, not just the rare oversized load.